Multi-Shock

Dichlor-Potassium Monopersulfate Blend
55% Dichlor by volume

1 lb.


Fast Dissolving, will not cloud water or cause scale.

Directions
Always add with pump and filter running to ensure complete mixing and good circulation. Apply product when swimming pool is not in use. Test chlorine level prior to re-entry to make sure the residual concentration in the pool is between 1 and 4 ppm. Reentry is not recommended above levels of 4 ppm chlorine due to risk of bodily injury.

USED FOR WEEKLY SHOCK TREATMENT IN CONJUNCTION WITH A PRIMARY SANITIZER:
For pools with moderate daily use, add this product weekly at a dose of 1 pound per 10,000 gallons of pool water. Each pound of this product will raise the free chlorine concentration by 3 ppm in 10,000 gallons of pool water. More frequent and/or heavier doses may be required during periods of heavy use or following heavy rains or high winds.

Downloads
MSDS Sheets (pdf)