Stain & Scale Magic


1 qt.


Stain & Scale Magic is a highly concentrated formula for effectively removing iron, copper, manganese and other metals from pool water to restore water clarity. This product also removes metal stains and scale from pool surfaces and equipment and is compatible with all sanitation systems.

Directions

1. For pools with iron, copper, manganese or other metals present in the water, apply over entire pool surface with filter system operating. For best results use 1 quart Stain & Scale Magic per 10,000 gallons of water to remove stains, prevent plating and restore water clarity.

2. Regular use of Stain & Scale Magic will keep pool water clean and the pool shell and plumbing in good condition. For stain prevention use one quart per 20,000 gallons if testing indicated metals above 3 ppm, or use 3 ounces per 10,000 gallons per week if pool has tendency to show increasing metal content in water.

3. Pool water pH should be at 7.5 or above when treatment begins. For copper/silver ion treated pools, remove electrodes or turn off ionizer for 5 days.

4. Do not add more than recommended dosage. For best results the water temperature should be above 60°F, and run the pump for 24 hours.


Downloads
MSDS Sheets (pdf)